Case 12v
Case 12v
 |
 Logisys 12 RED NEON CATHODE LIGHT CASE LIGHTS 12v  US $9.50
|
 NEW Antec 120mm Blue LED Case Fan 12V US $12.99
|
 NEW Antec 120mm Case Fan 12V US $12.99
|
 120mm Blue LED 2400RPM Case Fan 12V 038A US $5.99
|
 120mm Blue LED 900RPM Low Noise Case Fan 12V 018A US $8.99
|
 310 dBA DC 12V Case Cooler Cooling Fan for PC Computer US $7.98
|
 Plastic DC 12V Black 2 Pin 60mm Cooling Fan for PC Case US $4.84
|
 EXTREME COOLING TOWER CASE FAN XCLIO 12V DC US $.99
|
 4 Pin Power Connector DC 12V Case Cooler Cooling Fan for PC Computer New US $7.75
|
 USA 120mm Multicolor 4 Color LED Clear plastic computer Case 12v Fan US $2.95
|
 Noctua Fan NF P14FLX Water Cooling Radiator and Case 14cm 12V 1200 RPM 1103 m h US $30.99
|
| The Computer Help Center |
Power Supply Unit Fan to Computer Case Fan?
Alright I have an Aspire Blue Plastic Blue LED POWER SUPPLY fan and I want to rig it as a case fan. It is a 12v fan and from what i read it sounds like i can splice the red wire to a yellow molex to get the 12v and then the black to the ground but I dont want to burn out a PSU so is it possible to thread it into a molex?
No, don't do that. On a molex connector, the red wire is +5V, the two blacks are grounds and the yellow is +12V. You'll want to use the yellow (+12V) and a black (ground). In todays systems, yellow is always +12V. This will show you the different voltages used for the different types of power supply connectors .
http://www.playtool.com/pages/psuconnectors/connectors.html
November 13th, 2006 in
Uncategorized | tags: 12v case fan, case, case 12v, case 12v battery, computer, hardware, led, mods